Advanced Native Technologies START 16R Gebruikershandleiding - Pagina 3

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Advanced Native Technologies START 16R. Advanced Native Technologies START 16R 19 pagina's. Pll diversity uhf wireless systems

Pagina afdrukken

Series

1 | INTRODUCTION

Thank you for choosing a A.N.T – Advanced Native Technologies – product!

In our START 16 "PLL Diversity" wireless systems we have put our passion and

our technological background gained over the years, to offer products that meet

your needs, maintaining the quality over time.

START 16 wireless systems operate in UHF band with 16 channels (frequencies).

You may choose the operating frequency via buttons or via infrared using ASC

feature.

Both versions of START 16R receivers adopt Diversity technology. They are

equipped with two discrete antennas A and B, which are used to select at any

moment the best radio signal. The antennas are fixed on the front panel of the

receiver, but may be placed in an horizontal position by means of a junction

present at their base.

Please, dedicate some minutes to read this instruction manual in order to quickly achieve

the best performances from this product.

For safety precautions, warranty and disposal, please refer to attached Section 2.

For further information about all A.N.T products catalog, please visit our website:

www.ant-intomusic.com

2 | DESCRIPTION

FRONT PANEL

START 16 Series

User manual |

2.1 | RECEIVER - START 16R

1 POWER

Press this button on receiver front panel for 1" to turn ON/OFF the unit.

2 AF LEVEL METER

It shows the audio signal level. Avoid that the red LED (the rightmost one)

remains lit continuously.

3 ASC

Press this button to achieve automatic channel (frequency) synchronization

via infrared.

4 IR WINDOW

It allows the synchronization of the channel (frequency) with the transmitter.

After pressing the ASC button, place the handheld microphone or beltpack

transmitter close to this window and wait for the selected channel to stop

flashing on the display. After the synchronization, the receiver's display is

lit steadily on the selected channel (frequency).

5 DISPLAY

It shows the number of the activated channel.

6 UP

Press this button to scroll and select channel number in ascending mode

from 01 to 16.

7 DOWN

Press this button to scroll and select channel number in descending mode

from 16 to 01.

8 ANTENNA A

This LED turns on automatically when the unit is receiving a better signal

from the antenna A.

9 ANTENNA B

This LED turns on automatically when the unit is receiving a better signal

from the antenna B.

10 VOLUME

It adjusts the output audio level.

11 ANTENNAS

For the best signal reception, please place the antennas in a vertical position.

START 16 Series

| User manual