Bose 802 C II Gebruikershandleiding - Pagina 17

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Bose 802 C II. Bose 802 C II 22 pagina's. System controllers
Ook voor Bose 802 C II: Servicehandleiding (20 pagina's), Servicehandleiding (23 pagina's)

Pagina afdrukken

1. Before You Begin
2. Basic Configurations
3. Sound System Configurations
4. Introducing the Controllers
5. Input Connections
6. Output Connections

Figure 25

Positioning and securing the external harness.

5. Remove the lock nut and washer from the

internal protection circuit harness (Figure 5a).

Set them safely aside.

6. Thread the internal harness through the rear

panel. Insert the small white connector first. The

wire end of the harness should now be inside

the controller.

7. Turn the barrel connector so the flat side

matches the flat side of the hole on the

controller. The connector should sit firmly

against the outside of the rear panel (Figure

5b).

8. Replace the lock nut and washer on the internal

harness INSIDE the rear panel. Tighten firmly

with needle nose pliers (Figure 5c).