Atlas Copco LCD 1500 Veiligheids- en bedieningshandleiding - Pagina 17
Blader online of download pdf Veiligheids- en bedieningshandleiding voor {categorie_naam} Atlas Copco LCD 1500. Atlas Copco LCD 1500 20 pagina's. Hydraulic core drill
LCD 500, 1500
Noise and vibration data
Type
LCD 500 (Ø 102 mm, 20 lpm)
LCD 500 (Ø 102 mm, 30 lpm)
LCD 1500 (Ø 62 mm, 20 lpm)
LCD 1500 (Ø 62 mm, 30 lpm)
Vibration declaration statement
Vibration value A and uncertainty B determined according to EN ISO 20643. See table "Noise and vibration
data" for the values of A, B, etc.
These declared values were obtained by laboratory type testing in accordance with the stated directive or
standards and are suitable for comparison with the declared values of other tools tested in accordance with
the same directive or standards. These declared values are not suitable for use in risk assessments and values
measured in individual work places may be higher. The actual exposure values and risk of harm experienced
by an individual user are unique and depend upon the way the user works, in what material the machine is
used, as well as upon the exposure time and the physical condition of the user, and the condition of the machine.
We, Construction Tools EOOD, cannot be held liable for the consequences of using the declared values, instead
of values reflecting the actual exposure, in an individual risk assessment in a work place situation over which
we have no control.
This tool may cause hand-arm vibration syndrome if its use is not adequately managed. An EU guide to managing
hand-arm vibration can be found at http://www.humanvibration.com/EU/VIBGUIDE.htm
We recommend a programme of health surveillance to detect early symptoms which may relate to vibration
exposure, so that management procedures can be modified to help prevent future impairment.
© 2015 Construction Tools EOOD | No. 3392 5189 01c | 2015-01-31
Original instructions
Noise
Sound pressure
Sound power
Declared values
EN ISO 11203
2000/14/EC
Lp
r=1m dB(A) rel
guaranteed dB(A)
20µPa
<70
<70
<70
<70
Safety and operating instructions
Three axes values
Declared values
EN ISO 20643
Lw
A
2
m/s
value
rel 1pW
-
3.10
-
3.00
-
2.70
-
3.40
Vibration
B
2
m/s
spreads
0.81
0.82
0.76
0.83
17