Atlas Copco PDR 30 T Veiligheids- en bedieningshandleiding - Pagina 5
Blader online of download pdf Veiligheids- en bedieningshandleiding voor {categorie_naam} Atlas Copco PDR 30 T. Atlas Copco PDR 30 T 11 pagina's.
Pagina afdrukken
Safety and operating instructions
See the "Noise and vibration declaration statement"
for the machine, including the declared vibration
values. This information can be found at the end of
these Safety and operating instructions.
DANGER
Electrical hazard
The machine is not electrically insulated. If the
machine comes into contact with electricity, serious
injuries or death may result.
Never operate the machine near any electric wire
►
or other source of electricity.
►
Make sure that there are no concealed wires or
other sources of electricity in the working area.
WARNING
Concealed object hazard
During operating, concealed wires and pipes
constitute a danger that can result in serious injury.
Check the composition of the material before
►
operating.
►
Watch out for concealed cables and pipes for
example electricity, telephone, water, gas and
sewage lines etc.
If the inserted tool seems to have hit a concealed
►
object, switch off the machine immediately.
Make sure that there is no danger before
►
continuing.
WARNING
Involuntary start
Involuntary start of the machine may cause injury.
Keep your hands away from the start and stop
►
device until you are ready to start the machine.
Learn how the machine is switched off in the event
►
of an emergency.
►
Stop the machine immediately in all cases of
power supply interruption.
WARNING
Noise hazard
High noise levels can cause permanent and disabling
hearing loss and other problems such as tinnitus
(ringing, buzzing, whistling, or humming in the
ears). To reduce risks and prevent an unnecessary
increase in noise levels:
Risk assessment of these hazards and
►
implementation of appropriate controls is
essential.
Operate and maintain the machine as
►
recommended in these instructions.
If the machine has a silencer, check that it is in
►
place and in good working condition.
►
Always use hearing protection.
Use damping material to prevent work pieces
►
from 'ringing'.
10
Maintenance, precautions
WARNING
Machine modification
Any machine modification may result in bodily
injuries to yourself or others.
Never modify the machine. Modified machines
►
are not covered by warranty or product liability.
Always use original parts, insertion tools, and
►
accessories.
►
Change damaged parts immediately.
Replace worn components in good time.
►
WARNING
Accessory hazards
Accidental engagement of accessories during
maintenance or installation can cause serious
injuries, when the power source is connected.
Never inspect, clean, install, or remove accessories
►
while the power source is connected.
Storage, precautions
CAUTION
Hot insertion tool
The tip of the insertion tool can become hot and
sharp when used. Touching it can lead to burns and
cuts.
Never touch a hot or sharp insertion tool.
►
Wait until the insertion tool has cooled down
►
before carrying out maintenance work.
♦
Keep the machine and tools in a safe place, out
of the reach of children and locked up.
3392 5240 01 | Original instructions
PDR 30 T