Bose Videobar VB1 Handmatig - Pagina 29

Blader online of download pdf Handmatig voor {categorie_naam} Bose Videobar VB1. Bose Videobar VB1 47 pagina's. Display mounting kit
Ook voor Bose Videobar VB1: Snelstarthandleiding (2 pagina's), Snelstarthandleiding (2 pagina's), Vragen (8 pagina's), Belangrijke veiligheidsinstructies Handleiding (17 pagina's), Snelstarthandleiding (2 pagina's), Snelstarthandleiding (2 pagina's)

Rear Panel

NETWORK

1. Network: Use this 1 Gbps RJ45 connection for configuration and/or monitoring.

(This port is on the inner side of the rear panel.)

2. Power: Connect the included power supply.

3. Audio In: Use a 3.5 mm (1/8 in) stereo cable (not included) to connect to an optional

audio source, such as the audio output from a connected monitor or display.

4. Ctrl Input: Use the port for mute override using the included 2-pin Euroblock

connector. By default, this input is active low and includes an internal pull-up.

5. USB-C: Connect this port to the computer hosting the meeting.

6. HDMI Display: Use the included HDMI cable to connect this port to a display. (This

port is on the inner side of the rear panel.)

Note: The host computer must have the latest DisplayLink® driver installed, and the

VB1 must have its DisplayLink setting enabled (disabled by default) for the HDMI

output to function. Visit displaylink.com/downloads to download the latest driver.

Enable or disable the DisplayLink setting using the Bose Work Configuration app or

WebUI or Bose Work Management app (see Software Applications (Page 23)).

P R OD UC T D ETA I L S

INPUT/输入

24V

1.875A

NETWORK

POWER

AUDIO

CTRL

USB-C

INPUT

TO PC