Alert-it Care Systems P163ACB Handboek - Pagina 5

Blader online of download pdf Handboek voor {categorie_naam} Alert-it Care Systems P163ACB. Alert-it Care Systems P163ACB 10 pagina's. General alarm monitor

Pagina afdrukken

Link" (see page 8). The alarm will automatically reset if the user returns to

bed/chair.

To special order the monitor can be programmed to play a warning tune for 30

seconds prior to sending the alarm

P163BCB Switch Input

Activating an external switch will result the same function as for the Call for

Assistance above.

Reset the Alarm

All alarms are non-latching and reset once the alarm is clear. Hence the user only

has to reset the Nurse Call System

Turn off P163

The unit is supplied with a small RED tagged key. Insert this into the front power

socket to turn the unit off and prevent alarms being detected. If a mains power

adapter is used, then this can be disconnected to isolate the monitor.

The rechargeable version can only be turned off be removing the standby battery,

which can then be replaced. The unit will then stay dormant until the RESET

button is pressed (to cause a beep).

Alarm indication on monitor and at the pager/receiver

Alarm

Call

External

(Instant)

Battery Low

Battery Fail

Battery

Dead

Operation (cont)

Detect Delay

Instant

Instant or 6 minutes as

Link set

The P163 beeps every 0.5 sec with no LED and no transmission

UH1142B P163 Wired General Interface v2 page 5 of 8

P163

Nurse Call

Flash

Activated

Flash

Activated

Flash every 8 sec