ATV IPVD3RWI Beknopte handleiding - Pagina 11

Blader online of download pdf Beknopte handleiding voor {categorie_naam} ATV IPVD3RWI. ATV IPVD3RWI 16 pagina's. 3mp vca vp dome network camera

• Installing Camera

Carefully remove the contents from the box, and verity that nothing was damaged in ship-

ment.

1. Make mounting holes and cable hole in the place (ceiling or wall) to which this dome

camera is installed using the Drilling guide label.

2. To remove dome cover, turn the dome body counter clockwise until locations reach end

travel and pull off. Push the liner on the sides where the patterns are put in the teeth

of a comb and pull it out.

3. Attach the housing to the ceiling using suitable fasteners, M6x35 tapping screws sup-

plied only use if they are suitable. Turn the housing to right direction about 16 degrees

to lock in place.

4. The assembly of the dome body and liner is in reverse order of disassembly. Finally,

lock dome body with locking screw(M3x5) from the accessory Kit.