Aucma AUS-S2 Bedieningshandleiding - Pagina 7
Blader online of download pdf Bedieningshandleiding voor {categorie_naam} Aucma AUS-S2. Aucma AUS-S2 7 pagina's. Ultrafiltration under sink water filter system
Pagina afdrukkenMaintenance
Fault Diagnosis and Troubleshooting
Troubles
Possible Cause
The filter is blocked
Decreased
The water pressure is low
Outflow
The ball valve is not fully opened
Check if the ball valve on the water inlet end is fully opened
Failed filter
Bad Water
Long-term
Quality
suspend(＞3 days)
Poor inlet water
Wrong installation of PE Pipe
Connector is broken
Leakage
The pipe is leaked,
the inlet 3-way valve
or the ball valve is broken
Note:
The filter needs to be replaced in time to ensure the safety
of the filtered water; If not replace filter in time, it'll weaken
filtration efficiency, increase maintenance cost, shorten
service life of water filter and cause other adverse effects.
Solutions
Change filter
Take supercharge Measures
Change filter
Turn on the tap and let the
water run for 30 minutes
To ensure that the water source is municipal tap water
Please cut off the water supply and
contact our after-sales service employee
Warranty Statement
Dear Users:
Thank you for choosing Aucma products, we will provide you with quality services.
You can enjoy the following services provided by our company :
(1)Free repairing is available for the water purification machine (except the filter) for
their functional defects within one year.
(2)The water filter can not be used for commercial purposes, otherwise the warranty
period for whole machine (except the filter) and the main accessories will be shorten
to 3 months, unless otherwise stipulated in the purchase and sales contract.
(3) The warranty period shall be calculated from the original date of purchase.
2.We do not provide free repair services to the following situations but we can provide
you with paid service.
(1)Exceeded the warranty period, but can be used after repair;
(2)Damages caused by transportation, improper storage, misuse or other users' own
reasons.
(3)Products that are removed or repaired without our company's permission or in
maintenance shop without our authorization;