AnyFit PS05 Handmatig - Pagina 9

Blader online of download pdf Handmatig voor {categorie_naam} AnyFit PS05. AnyFit PS05 12 pagina's.

Pagina afdrukken
Step 3
1. Attach 2×Guiding Rod Cover (#27), 2×Guiding Rod(#33), 1×Top Plate(10)(#16),
1×Weight Plate(#76), 2×Buffer Pad of Weight Plate(#40), 2×Weight Support 50(#15),
2×Rubber Pad (#41) to Weight Frame Assembly(#1), using:
2×Flat Washer Φ11XΦ20X2(#70)
2×Socket Head Cap Bolt φ7.5×M10×45(#48)
2. Cross 1×CPS05 Steel Cable 1(#36) over 3×Pulleyφ89(#35), and attach to
Weight Frame Assembly(#1) and Moving Pulley Welding(#13),
then separately connect each side to Top Plate(10)(#16) and Grounded Frame
Assembly(#3), using:
3×Button Head Cap Bolt M10X45 S15(#59)
3×Nut M10(#74)
3. Cross 1×CPS05 Steel Cable 1(#37) over 2×Pulleyφ89(#35), and attach to
Main Frame Assembly(#2), over 1×Aluminum Pulleyφ89(#34) and attach to
Swing Frame Assembly(#10), then separately connect each side to
Moving Pulley Welding(#13) and Wheel Plate Frame(#6), and assembly
3×Short Steel Cable Sleeve, using:
1×Pulley Cover(#29)
1×Pulley Fixing Plate(#30)
3×Flat Washerφ11×φ20×2(#70)
6×Flat Washer Φ8.5×Φ16×1.5(#69)
1×Socket Head Cap Bolt M10X20（#61）
4. Attach 1×Magnetic Selection Pin（#31）to Weight Plate(#76)
Notice:
Fasten Bolts and Nuts According to Assembly Requirement.
This is the instructions of 145LBS, please assembly according to
the weight plate you bought.
13
2×Hex Nut M10(#73)
6×Flat Washer Φ11XΦ20X2(#70)
2×Button Head Cap Bolt M10X45 S15 (#59)
1×Button Head Cap Bolt M10×25（#56）
3×Button Head Cap Bolt M8X45 (#55)
3×Nut M8（#72）
1
3
2
30
6
34
61
Step 4
1. Attach 1×Spacer(#28) to Grounded Frame Assembly（#3）, using:
6×Flat Head Cap Screw M6X16（#50）
2. Attach 1×Adjustment Handle Frame（#7） to Right Leg Frame Assembly（#5）, using:
1×Hex Head Bolt M12X95（#65）
2×Flat Washer Φ13×Φ24×2（#71）
3. Attach 2×Leg Pad Fixing Rack Welding（#12）to Left Leg Frame Assembly（#4）
and Right Leg Frame Assembly（#5）separately, using:
2×Circlips for Shaft Φ25（#49）
4. Attach 2×Leg Pad(#44), 1×Tapered Buffer Pad(#38) to Leg Pad Fixing Rack
Welding（#12）separately, using:
3×Button Head Cap Bolt M10X30（#57） 3×Button Head Cap Bolt M10X45（#58）
3×Flat Washer φ11×φ20×2（#70）
48
33
16
35
31
40
15
36
41
35
55
55
35
35
13
56
1×Nut M12（#75）
14