Aolait 12x30w Led Moving Bar RGBW 4 in 1 light. Gebruikershandleiding - Pagina 4

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Aolait 12x30w Led Moving Bar RGBW 4 in 1 light.. Aolait 12x30w Led Moving Bar RGBW 4 in 1 light. 17 pagina's.

Pagina afdrukken

3. Operation Instructions

-- This product is a moving light for LED light source, used to create beautiful

performances.

-- If the product is subjected to a large temperature difference (for example, after

shipping), do not start the product immediately, as the heat account shrinks and

damages the product. Please wait until the device reaches normal room temperature

before starting the product.

-- Pay attention to shockproof. Avoid strong collisions during product installation.

-- Please do not lift the entire product through the lamp cap, as the mechanical

properties of the device may be damaged.

-- When selecting an installation location, make sure that the product is not exposed

to excessive heat, humidity, or dust. Please do not put any wires on the ground,

otherwise you may be exposed to electric shock.

-- Before installing the product, please make sure the installation point is safe.

-- Please fasten the product to the safety rope and check that all screws are correct

during installation.

-- Make sure the lens is in good condition. When the lens is damaged or scratched,

replace the lens.

-- It is recommended that the product be operated by a technician who is familiar

with the product. Non-technical personnel are prohibited from operating this

equipment because many of the losses are the result of non-professional operations.

-- Please keep the packaging materials in a safe place for secondary transportation.

-- Do not modify the product without the guidance of the manufacturer or distributor.

-- Any equipment malfunction caused by failure to use this equipment in accordance

with the instructions is not covered by the warranty. Any resulting damage caused by

short circuit, injury, electric shock, ultraviolet light, or explosion of the lamp is not

covered by the warranty.

-- Do not continuously turn on or off the lamp bead during use. Wait at least 20

minutes before starting the lamp again, otherwise it will affect the life of the lamp

bead.