3T-Components 3T-MOTORS 3T35-10SD Handleiding voor installatie en gebruik - Pagina 8
Blader online of download pdf Handleiding voor installatie en gebruik voor {categorie_naam} 3T-Components 3T-MOTORS 3T35-10SD. 3T-Components 3T-MOTORS 3T35-10SD 16 pagina's. Shutter motors with mechanical limit switches, for shafts from 60/40 mm
Pagina afdrukken
INSTALLATION INSTRUCTIONS
Motor type 3T45-SD
Installation with universal bearing or cover cap bearing
Universal bearing
Installation with universal bearing:
Push the motor with the square into the opening of the bearing
•
and secure with cotter pin.
Installation with cover cap bearing:
Remove screws from metal plate on motor head
•
Remove metal plate with square spigot
•
Fasten bracket for blend cap bearing
•
2.1
2.3
Slide motor type 3T45-SD with bracket into cover cap bearing
•
and secure with both securing clips.
Cover cap bearing
Cotter pin
>
fig. 2.1
>
fig. 2.2
>
fig. 2.3
2.2
Metal plate with
square spigot
Bracket for
blend cap bearing
Securing clips
Motor type 3T35-SD
Installation with universal bearing or clip bearing
Universal bearing
Installation with universal bearing:
Push the motor with the square into the opening of the bearing
•
and secure with cotter pin.
Installation with clip bearing:
Remove screws from metal plate on motor head
•
Remove metal plate
>
fig. 2.5
•
Remove motor square spigot
>
fig. 2.6
•
Reattach metal plate
>
fig. 2.7
•
2.4
Square spigot
2.6
Engage motor type 3T35-SD without square spigot in clip bearing.
•
clip bearing
Cotter pin
>
fig. 2.4
2.5
2.7
3T-MOTORS Tubular motors | Installation instructions
8