Dunlop 535Q Gebruikershandleiding - Pagina 5

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Dunlop 535Q. Dunlop 535Q 8 pagina's. Wah-wah pedal

VOLUME CONTROL

By turning the Volume Control knob located on the left side

of the pedal, you control the amount of gain. Turning the knob

clockwise will increase your gain to up to 16dB.Turning the knob

counter-clockwise will decrease your gain to 0dB, or normal

throughput.

VARIABLE Q

The "Q" adjustment is also located on the left side of the

pedal; you can control the sharpness of the bandpass with this

adjustment. High Q is a very selective bandpass filter, low Q is a

very broad bandpass filter approaching an almost volume like

control. The lower Q settings have more musical quality and

don't effect tone as much as the high Q settings.

The CRYBABY® 535Q Wah Wah pedal uses one 9-volt battery.The battery access is

through the bottom of the pedal.

The 535Q uses the Dunlop ECB03 Adapter (ECB03E for Europe), a 9-volt DC regu-

lated AC adapter. Plug polarity is positive on the barrel and negative in the center.

NOTE: Battery must be installed to operate the 535Q unless an AC adapter is used.

When using a battery, the life of the battery can be greatly extended if you unplug the

input when the effect is not in use for long periods of time.

POWER REQUIREMENTS