Audiovalve LUMINARE 2015 Gebruiksaanwijzing - Pagina 11
Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} Audiovalve LUMINARE 2015. Audiovalve LUMINARE 2015 17 pagina's. Ultra highend headphone tube amplifier
Pagina afdrukkenLUMINARE
ultra highend headphone tube amplifier___________________
The headphone protector reliably protects the headphones from pulses that can occur when switching
ON or switching OFF the amplifier. The outputs of the amplifier are shorted for this time both on power
as in both cases.
NOTE: When you switch ON the amp - please turn down the volume pot completety. In its time when
the poutputs are short circuit for protect the headphone, the amp no like a signal.
When the red sine wave at the output of the OPA reaches the upper or lower limit of supply voltage (out
of range), one of the two red LED ( green / blue wave ) lights as an indication of an overload of the
amplifier. Then either the volume is too high, impedance is mismatched, or a tube of this channel is
faulty.
A word of warning:
The volume control of the LUMINARE should always be turned all the way down before
operating any rotary switch. When you turn thehz MODE switch in a considerable jump in
volume, which may damage your hearing or your equipment.
- CLIPPING / OVERLOAD circuit -