Abus PLBW10000 Handmatig - Pagina 13

Blader online of download pdf Handmatig voor {categorie_naam} Abus PLBW10000. Abus PLBW10000 18 pagina's. Dual motion detector
Ook voor Abus PLBW10000: Beknopte handleiding (2 pagina's), Beknopte handleiding (4 pagina's)

Pagina afdrukken

2.6. Behavior PIR sensor

Warm up phase

It takes about 1 minute for the PIR sensors to warm up after the battery is inserted. During this time the

LED behind the lens will light up. When the LED goes out, it means that the warm-up process is

complete and the detector is ready for detection.

Hint:



This has no effect on the inclusion/exclusion process.



After removing the batteries, wait 5 seconds before inserting them again.

PIR waiting time



As soon as motion is detected, the device's LED lights up and it sends a motion alarm to the Z-

Wave controller. The device now waits for a preset time (waiting time) until it resets the motion

alarm to the Z-Wave controller.



If motion is still present after 160 seconds, a new motion alarm is sent and the waiting time for

resetting the motion alarm is reset. The detector will not reset the motion alarm until the waiting

time for reset has expired without motion detection.



The default period of the reset waiting time is 180 seconds. Changes have a significant effect

on the expected battery life.

English