Audiovox Sirius Shuttle SIR-CK2 Installatiehandleiding - Pagina 10
Blader online of download pdf Installatiehandleiding voor {categorie_naam} Audiovox Sirius Shuttle SIR-CK2. Audiovox Sirius Shuttle SIR-CK2 16 pagina's. Sirius satellite radio
Ook voor Audiovox Sirius Shuttle SIR-CK2: Installatiehandleiding (16 pagina's)
Pagina afdrukken
TOP RETAINING
CLIP
SAT. (MAIN)
RF CONNECTOR
BOTTOM
LEFT SLIDE
CLIP
6. Sirius Program Listening Options
The Shuttle and Cradle provide an audio output
signal in three manners:
1. When using CK1 or CK2 cradle, the audio signal
can be routed through an audio cable which is
applied to the auxiliary inputs of a radio or
entertainment system.
2. When using the CK1 cradle, the audio signal can
be transmitted to a car radio on one of four
selectable FM frequencies. The audio signal can
then be played through your car radio when the
car radio is tuned to one of these frequencies.
3. Some listeners prefer to use a hard-wired FM
transmitter. In this instance, when using the CK1
cradle, an optional FM Switching Box assembly
16-PIN SYSTEM
(Part No. 112C3159) is available and provides a
CONNECTOR
hard-wired FM output when connected to the FM OUT
connector on the left side of the cradle; the other end
of the switching box plugs into the antenna jack of your
TERR. RF
radio. By using this assembly, and selecting the
CONNECTOR
appropriate FM output frequency (88.1MHz, 88.3MHz,
88.5MHz or 88.7MHz) with the slide switch, the Sirius
BOTTOM
signal received at the SAT (MAIN) or TERR. cradle
RIGHT
SLIDE CLIP
antenna input can be played through your car radio
when tuned to one of these frequencies.
-10-
SHUTTLE
CRADLE
CK1
FM OUT
AUDIO OUT
DC 12V
FM FREQUENCY
SELECT SLIDE
SWITCH:
88.1 MHz
88.3 MHz
88.5 MHz
88.7 MHz