ADE 2311 Bedieningshandleiding - Pagina 6

Blader online of download pdf Bedieningshandleiding voor {categorie_naam} ADE 2311. ADE 2311 12 pagina's. Electronic table scales, portion scale

Remove all weights from the platform.

Switch on the scale. On/Off switch is placed underneath the scale on the right hand side. After

switch-on the scale is running an automatic functions test ending with showing "0.000" in the

display. The scale is now ready for weighing.

After changing the location of the scale especially with temperature fluctuations please wait for

15 minutes after switch-on to warm up inside the scale. This helps stabilizing measuring results

of weighing.

Switch off the scale with switch, which is on the right hand side underneath the scale.

By using the

key eventual irregularities occurred after start up the scale can be

compensated by setting the display back to zero for all subsequent weighing procedures.

Place the weighing object on the platform and the display will show the weight.

A stable value will be shown on the left of the display with symbol

If there's an underload display shows „------" and an acoustic warning signal appears. Remove

all objects from the weighing platform, adjust it and restart weighing process.

If there's an overload display shows „--OL--". In this case remove all objects to avoid irreparable

damages.

If display of the scale shows a value without objects on the platform, press

manually.

This function enables the user to weigh objects together with others (e.g. container, foil or paper

cloth) without the additional weight influencing the weighing result.

Switch on the scale.

If necessary use the manual zero function by pressing

indication appears on display.

Place the object (e.g. container, foil or paper cloth) on the tray.

Press

key to come back to zero. Display now shows `0.000´ and NET and ZERO

symbol will appear.

Use of the scale

to set zero

if necessary. The ZERO

90612-30-180320-Rev009-UM-en