ADE KWE15-IP68 Bedieningshandleiding - Pagina 10

Blader online of download pdf Bedieningshandleiding voor {categorie_naam} ADE KWE15-IP68. ADE KWE15-IP68 16 pagina's. Compact scale in stainless steel housing

Pagina afdrukken

3.8

Printer setting

Please start as described in the beginning of chapter 3 to enter this menu and „Prt_" is shown

in the display.

Setting has to be "Prt_0", because scale has no interface for connecting PC or printer.

SP – x.x

Version number

„xxxxxx"

Software number

"CAPxx.0"

Capacity / Maximum load of the scale

Scale is overloaded. The current weighing is higher than the valid

„nnnnnn"

capacity.

"------"

Data is unstable

"LLLLLL"

Output of load cell is lower.

"HHHHHH"

Output of load cell is higher or turn on zero is higher than range.

- Lo -

Low battery – Recharge the rechargeable battery immediately.

FULL

Rechargeable battery has been charged fully.

"_Inlt_"

Faulty weighing

Fault

Faulty weighing result

Display shows „HHHHHHHH"

Display shows „LLLLLLLL"

Rear display doesn't show

anything

Rechargeable battery is not

loading although loading is

shown

Rechargeable battery is not

loading and no loading is

shown

Quickly discharging of

rechargeable battery

Display shows „_InIt_"

Display Symbols

Cause

Parameter of load cells have

changed

Over zero range

Load cell or PCB damaged

Parameter fault

Load cell damaged

Rechargeable battery is

damaged

Charging unit for

rechargeable battery is

damaged

Old rechargeable battery

Faulty weighing

Solution

Re-calibration

Correction of setting as

shown in the manual

Replace rechargeable battery

Re-start the scale or Re-

calibration

KWE-190107-Rev008-UM-en