ADE M20813 Bedieningshandleiding - Pagina 2
Blader online of download pdf Bedieningshandleiding voor {categorie_naam} ADE M20813. ADE M20813 5 pagina's. Mechanical round dial personal scale including telescopic height rod
Your ADE Mechanical Round Dial Personal Scale with Telescopic Height Measuring Rod is a quality
product. To achieve the best possible weighing and measuring results kindly read and respect this
Operating Manual.
Check carton contents:
-
Column and Round Dial
-
Scale platform
-
Telescopic Measuring Rod
-
Operating Manual
Assembling:
All parts and pieces have been pre-assembled by the factory to make sure mounting of the scale will
be quick and easy.
Fixing the Height Rod:
-
Remove the height rod from packing material and loosen the 2 screws on the lower side.
-
Guide the height rod through the green fixing device you find on the column and fix it firmly by
using the green fixing device on the platform with the 2 screws.
-
Make sure the screws are pulled tight.
Connect column and platform:
-
Loosen the 3 screws you find on the lower end of the column.
-
Fit column and platform together and screw them carefully together by using the 3 screws you
loosened before.
-
The tension bar is inside the column.
-
Put the scale in an horizontal position to hook the tension bar into the lever system you find
underneath the platform. This can be either done manually or – a bit easier – by using a
strong string.
The scale is now ready to be used. Take it to the working area and make sure the ground is even and
smooth.
Zero adjustment:
Before first use of the scale and to make sure that the scale indicates the correct weight it has to be
set to ZERO manually.
-
First step on and off the scale for several times to make sure that all parts come back into the
right position after transport.
-
For zero setting procedure the platform must remain empty.
-
In case the pointer did not return 100% to the zero point you may adjust the it by careful
twisting the adjusting screw you find underneath the head of the scale.
-
Double check your adjustment by stepping on and off the scale again.
-
After zero adjustment the scale is ready for use.
1
Installation and use of the scale
060100-Rev000-M20813