ADE M301020 Series Bedieningshandleiding - Pagina 10

Blader online of download pdf Bedieningshandleiding voor {categorie_naam} ADE M301020 Series. ADE M301020 Series 16 pagina's. Electronic platform and handrail scales

ADE M301020 Series Bedieningshandleiding

Print out a record

The scales must be at standstill, e.g. standstill status display
Press the ENTER key (13) to send the data to the serial interface.
Note: Printing is not possible if the net weight is 0. The print function only produces one print-out. A reset is
required to print out another copy.

Cleaning

Please disconnect the unit from the operating voltage before cleaning. Do not use any aggressive cleaning
materials for cleaning; only use a damp cloth or conventional disinfectant.
Make sure that no liquids penetrate the unit!

Error messages

Error mes-
sage
Overload display
Overflow indicator (negative)
Overflow indicator (positive)
AD LOW
A/D above negative range
AD HI
A/D above positive range
EE SUM
Parameter or calibration error
EE WR
EEPROM indicates an error
PM SUM
Internal program indicates a check error
HOFSET
Switch on – above zero
LOFSET
Switch on – below zero
UOFSET
Irregular
10

Care, servicing and recalibration

Description
(14) appears at the screen.
Problem solution
Weight exceeds max. capacity of the
scales.
Negative weight indicated – weight too
low to be displayed (<=99999).
Positive weight indicated – weight too
high to be displayed (>=999999).
Check if the scales are correctly as-
sembled or if they are damaged.
Check if the scales are correctly as-
sembled or if they are damaged.
Recalibrate – please contact your sup-
plier or service partner:
Please contact your supplier or service
partner.
Please contact your supplier or service
partner.
Please remove the weight from the
scales and restart.
Check scales for damage and inform
your service partner:
Do not touch the scales after they have
been switched on.
M301020-01-210322-Rev005-UM-e