ADE M40010 Bedieningshandleiding - Pagina 7

Blader online of download pdf Bedieningshandleiding voor {categorie_naam} ADE M40010. ADE M40010 12 pagina's. Electronic chair scale, class iii approved,

ADE M40010 Bedieningshandleiding

Unit function

By using the Units key you may select the weighing mode (kg, lbs, st).

Cleaning

Before cleaning make sure the scale has been disconnected from the socket.
For cleaning just use a damp cloth or common disinfection products.
Do not use any aggressive cleaning fluids.
Make sure no water or cleaning fluid penetrates the scale.

Service

Display indication Lo
Display indication ErrL Check correct positioning of the scale (see chapter installation & use of scale)
Display indication Err
Display indication ErrP Severe failure of weighing system. Please contact your local dealer or service

Safety instructions

Do NOT use the scale
If the mains adapter shows visible damages
If mains adapter is not working properly
After long storage in humid places
In those cases contact your local dealer or service partner.

Storage and Transport

Keep all original parts and pieces for an eventual sending back of the scale in order to avoid any
possible damage during transport which automatically leads to no warranty.
Disconnect all cables before transport to avoid unnecessary damages.
Warranty – Liability
ADE will repair or replace this product within a period of 2 years from date of delivery applying to
defects occurred due to poor material or workmanship (presentation of invoice is necessary). All
moveable parts – batteries, cables, mains units, rechargeable batteries etc. – are excluded. Warranty
does not include natural wear, damages caused by incorrect or negligent handling, overuse or
unsuitable or improper storage. The cost of transport will be borne by the customer should the
equipment be located anywhere other then the customer's premises. In the event of transport
damage, claims under warranty can be accepted subject to using the complete original packaging and
the equipment secured the way it was packed and secured originally. All the packaging should
therefore be retained.
050100-Rev000-M40010

Cleaning, Maintenance and Re-approval

Recharge the power-pack by connecting the mains adapter to the display.
and make sure the scale is completely unloaded.
Function test does not automatically lead to `0.00´. Try zero setting key. If
display still indicates Err the scale needs calibration. Please contact your local
dealer or service partner.
partner.
6