Aussie Pumps D1310P4 Gebruiks- en onderhoudsinstructies - Pagina 8
Blader online of download pdf Gebruiks- en onderhoudsinstructies voor {categorie_naam} Aussie Pumps D1310P4. Aussie Pumps D1310P4 20 pagina's. Hot water pressure washer
Pagina afdrukken- It is necessary to check this essential safety
requisite. In case of doubt, ask for accurate
control of the power system by qualified
personnel.
The manufacturer may not be considered
responsible for damages occurred because
of the lack of the grounding system.
- The H.P. cleaner must be connected to the
electric supply by means of an omnipolar
switch with opening contacts of at least 3
mm. This switch must have electric features
which are consistent with the appliance.
(This requisite does not apply to H.P. cle-
aners with plug and electric power lower
than 3 kW).
It is recommended that the electric supply
to this machine should include a residual
current device that will interrupt the supply
if the leakage current to earth exceeds 30
mA for 30 ms or a device that will prove the
earth circuit.
- The appliance is disconnected from the
electric supply only by pulling out the plug or
switching off the omnipolar switch.
- Failure to respect the above absolves the
manufacturer of all liability and represents
negligent use of the product.
The water cleaner is considered as a fixed
device.
- Water cleaners with the "Total Stop" device
should be considered as off when the omni-
polar switch is in the "O" position or the plug
is unplugged from the socket.
- The appliance must be attended during
operation.
- The high pressure washer is not intended
for use by children, adolescents or persons
with reduced physical, sensory or mental
capabilities, under the influence of alcohol
or lacking experience and knowledge.
Operators must be made aware of the
instructions for using the appliance by a
person responsible for their safety.
Children must be supervised to ensure they
do not play with the high pressure washer.
- Use only original accessories that can allow
safe working of the appliance.
- The flexible hose connecting the lance to
the H.P. cleaner must not be damaged.
In case of damage, replace it immediately.
The hose must be marked with the admis-
sible pressure value, production date and
manufacturer's name.
- Hoses, connections and fittings for high
pressure systems are very important to
guarantee the safety of the H.P. cleaner.
Use only original spare parts which have the
manufacturer's approval.
- Do not use the H.P. cleaner when persons
or animals are in its of action field.
- High pressure jets may be dangerous if not
properly used.
The jet must never be directed at persons
or animals, electric appliances or at the
appliance itself.
- The high pressure water jet causes a re-
action power on the lance. Hold the lance
grip vigorously.
- The use of the H.P. cleaner must be con-
sidered according to the kind of washing
which must be performed.
Protect yourself against the ejection of solid
-
-