Aussie Traveller SUNBURST ECLIPSE Snelstarthandleiding

Blader online of download pdf Snelstarthandleiding voor {categorie_naam} Aussie Traveller SUNBURST ECLIPSE. Aussie Traveller SUNBURST ECLIPSE 5 pagina's.

Pagina afdrukken

ROLL OUT PROCEDURE - ALL TERRAIN POSITION

We recommend the All Terrain position (when support

arms remain attached to van) as it is stronger and

more stable than Patio position.

1. Unlock both arms from travel position. To open

travel locks squeeze rafter and top support arm

together and move plastic slider upwards as far as

possible See Figure 1A.

Pull rod may be used to move slider in this step.

2. Loosen black rafter knobs located on back of both

rafters. See Figure 1B.

Figure 1A

3. Locate Ratchet Lever behind right end of roller.

Using the pull down rod, move lever downward

See Figure 2.

The ratchet mechanism is functioning correctly if a

clicking noise is heard when rolling the awning out

or in.

Figure 2

1300 663 868 | [email protected] | aussietraveller.com.au

BRISBANE SHOWROOM: 11-15 Oasis Court, Clontarf QLD 4019 | MELBOURNE SHOWROOM: 235 Barry Road, Campbellfield VIC 3061

SUNBURST ECLIPSE AWNING

Figure 1B

4. Insert pull rod through the loop in pull strap. Pull

the awning open until fully extended. See Figure

3A & 3B. Do not overextend the roller.

Figure 3A

5. Slide the rafter up support arm until it locks into

position over the black spring button. Tighten

knob on rafter to tension fabric. See Figure 4.

6. Repeat on other arm.

Figure 4

Figure 3B