Gadhouse HENRY Gebruikershandleiding - Pagina 9

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Gadhouse HENRY. Gadhouse HENRY 13 pagina's.

7. Gently pull up the tonearm from its rest and move it over the record

where play is desired to begin. Use the Tonearm Lift Lever to raise the

Tonearm Lift and let the tonearm sit on it.

8. Set the Tonearm Lift Lever back to the down position, the tonearm will

descend slowly onto the record and begin playback.

9. When the record is ﬁnished playing, use the Tonearm Lift Lever to raise

the tonearm and then return it to the tonearm rest. To suspend the

playback, repeat the same steps.

10. Press the PLAY / STOP button again, the platter stop turning.

Bluetooth Receiver Function (BT)

1. Press the Power Switch to turn on the power.

2. Press the MODE button to choose Bluetooth mode, the indicator will

light in blue. You will hear an activation sound from the unit.

Turn on the Bluetooth feature of your audio device, search for

and pair.

Once your device is successfully paired with the unit, you will hear a short

conﬁrmation sound "Connected" Play and stream music from your device

to the unit.

Enjoy the music!

RCA Jacks

The RCA Jacks of this unit are shared as both the Phone output jacks and

the Line output jacks. They are determined by the Phono/Line Switch.

When used as a line output, the jacks output analog line-level signals and

could be connected directly with a pair of active speakers or the appropri-

ate input of your stereo system. When used as a Phono output, they should

be connected to the phono pre-ampliﬁer or the phono input of the stereo

system.

"HENRY"

NOTE:

If the Phono/Line switch is set at LINE position but RCA jacks connected

to the stereo system's phono input, the sound might be distorted due to

input overload and could damage your stereo system.

If the Phono/Line switch is set at PHONO position but RCA jacks

connected to the stereo system's line input, the volume will be very low

due to lacking signal pre-ampliﬁcation.

RCA Jack is not designed to be connected directly to the passive/unpow-

ered speakers and if it does, the volume will be very low.

UPC-Encoding

Visit our tutorial page to see the instruction of both macOS/Windows

operating system