Great Little Trading Animal Chair Deer L5018 Handmatig - Pagina 4
Blader online of download pdf Handmatig voor {categorie_naam} Great Little Trading Animal Chair Deer L5018. Great Little Trading Animal Chair Deer L5018 4 pagina's.
Pagina afdrukken
STEP 2:
Insert the end of the seat back (C) into the slot on the seat (A).
Take the bolt (#1) and insert into the hole visible from the back of the chair.
If there seems to be an issue with the alignment of the holes on the seat back and
the seat and bolt will not go through the hole, please turn the head around and try
again.
Thread the metal washer (#4) over the end of the bolt and follow with the
nut (#3). Nut to be attached to bolt metal end first.
When tightening the nut, hold it still with the spanner and use the Allen key
to tighten the bolt.
Ensure the nut/bolt fixing is FULLY TIGHTENED.
Please check all fixtures and fittings
regularly and tighten as necessary.
#3
Hardware for Step 2:
1x #1 Bolt
1x #4 Flat Washer
1x #3 Nut
C
#4
#1
STEP 3:
Your item is now ready to use.
Copyright© 2020 G.L.T.C. Ltd. All rights reserved.
4
Great Little Trading Company and GLTC are registered trade marks of G.L.T.C. Limited.