Great Little Trading Paddington L5479 Handmatig - Pagina 9
Blader online of download pdf Handmatig voor {categorie_naam} Great Little Trading Paddington L5479. Great Little Trading Paddington L5479 9 pagina's. Bunkbed
Pagina afdrukken
STEP 9:
Secure the ladder to the upper & lower front side rail using 4x connecting
screws (#11). Fully tighten with the Allen key.
Insert and tighten 8x screw (#12) into upper and lower side rails (H & K) at BOTH
ends.
#12
#12
H
K
H
#12
K
H
#11
#12
Hardware for Step 9
4x #11 Connecting Screws 55mm
8x #12 Screw 30mm
#11
#11
#11
#11
#12
STEP 10:
Roll out and position the upper set of slats on to the slat support rail with the ribbon
facing up. Push the end slat up against one headboard and fix in place at BOTH ends
using 2x 40mm screws (#15). Now repeat at the other end of the bed with the other
end slat. The slat ribbon will be taught. Now the end slats are in place, fix the remaining
slats into position at BOTH ends using the 40mm screws (#15).Repeat with the lower
set of slats.
#4
#10
#12
#4
#10
#4
#12
#4
#10
#4
OPTIONAL:
The cover caps (#10) can be used to conceal the bolt
heads of hardware #5 & #6. The cover caps (#14) can be
used to conceal the bolt heads of hardware #2 & #3.
Ensure they are pushed firmly into place if used.
Do not use the caps if children under 3 years have access
to the bed as they could become a choking hazard
Great Little Trading Company and GLTC are registered trade marks of G.L.T.C.
9
#15
56x
#10
2x
O
#10
#4
2x
#10
O
#4
2x
#4
#4
2x
#4
#10
#4
Copyright© 2022 G.L.T.C. Ltd. All rights reserved.
Limited.
#4
#10
#4
#10
#4
#4
2x
#4
#4
2x
#10
#4
2x
#4
Hardware for Step 10:
56x #15 Screws 40mm
14x #10 Cover Caps
32x #4 Cover Caps