ADEMCO 1025 Handleiding voor installatie-instructies - Pagina 2
Blader online of download pdf Handleiding voor installatie-instructies voor {categorie_naam} ADEMCO 1025. ADEMCO 1025 6 pagina's.
Pagina afdrukken
All interconnections
must be made with. U.L. listed limited energy cable.
CUT JUMPER
GROUND CABINET TO COLD ,WATER,PIPE'OR
ELECTRICAL
c
BOX, TO AVOID POSSIBLE STATIC VOLTAGE DAMAGE.
AS MAT)
CABINET
.
-
A
*Max. total load permitted to "bell" plus "acces-
BASIC
MOUNTlNG
SCREW
pRTsm
sories" (on alarm) is 2A.
**If using remote station(s) in lieu of keyswitch con-
I ""' 4L=J'CLOSE
ON 1
ALARM
LOOP STATUS SIG1
OR ACCESSORY
IAL POST
APPLICATIONS)
I
(6v. DC
I
6V.. 2SAH
TO 24 HR
110 v.
AC
OUTLET
LISTED CLASS I3
XFMR (12V.. 6VA)
trol, follow
instructions
accompanying
item(s)
used (e.g.: Nos. 244,245.215/216,22?/228.815/816,
5241).
FIGURE 1: Field Connections
*
- - - - - - - Optional routing of normal loop (for
additional entry/exit loop security).
7.6
9,W+),W-)
Emergency (Panic) Switches:
Connect locking type open circuit emergency
switches (such as No. 264,266,268
or 269) in parallel across these terminals.
Operation of an emergency switch at
any
time (system OFF
or
ON) ,will cause the
alarm bell(s) to ring and the output contacts to close. Alarms activated from emer-
gency switches do not cut off until the switches are reset.
No. 706 Mini-Howler (Optional):
Connect as shown in Figure 1. The mini-howler
will sound: 1) During the entry delay period. 2) In case of accidental closing with
the entry/exit zone open. 3) lf an alarm occurs in the entry/exit zone while the
panel is ON. In this last case, the No. 706 will sound until the alarm bell cuts off or
the entry/exit loop returns to normal (whichever occurs
leer).
When sounding, the
No. 706
draws 50 ma.
507
498