ADEMCO LYNXR Snelstarthandleiding

Blader online of download pdf Snelstarthandleiding voor {categorie_naam} ADEMCO LYNXR. ADEMCO LYNXR 8 pagina's.
Ook voor ADEMCO LYNXR: Snelstarthandleiding (8 pagina's)

Pagina afdrukken

8 /

Introduction

This Quick Start Guide can help you install the LYNX (non-rechargeable) and LYNX-R

(rechargeable ) quickly and easily by providing the basic steps for installation using the built-in

defaults. For more detailed information and important notes, refer to the LYNX and LYNX-R

Installation Instructions.

The following steps assume that one of the system's default tables will be used.

For programming data values and Powerline Carrier Devices other than those listed in the default

tables, see the Installation Instructions.

Default Table Summary

Zone

User

Code

Install

Code

Entering Program Mode: installer code + 8 0 0

Interactive Mode

* 56 Enhanced Zone Programming

* 83 Sequential Mode

*84 Assign Zone Voice Descriptors

Exiting Program Mode:

NOTES: •

4XL.N6WDUW*XLGH

LYNX-R is not intended for UL985 Household Fire applications.

Table 1

-------

front door

back door

window

motion detector

-------

loop 3 arm away

loop 2 disarm

loop 4 arm stay

loop 1 restore device 1

loop 3 arm away

loop 2 disarm

loop 4 arm stay

loop 1 restore device 1

duress

silent alarm

1-2-3-4

4-1-1-2

* 99 allows re-entry into the Program mode using Installer Code + 8 0 0.

* 98 inhibits re-entry into the Programming mode using the Installer Code.

Tables 2 and 4 support the automatic paging feature (open/close events reported to pager phone

number),and a Powerline Carrier Device programmed as device 8, which closes and stays closed

upon burglary alarms and restores after bell timeout. For other applications or actions (e.g., using a

pulsing siren), see the *80 Device Programming Menu Mode section of the Installation Instructions.

•

Primary report format for all tables is Ademco's Contact ID reporting. Tables 2 and 4 also use Contact

ID for secondary reporting. Tables 1, and 3 use 4+1 format for secondary reporting.

•

Table 2 records all events in the event log. Tables 1, 3, and 4 record only alarms, alarm restores,

troubles, and trouble restores in their event logs.

Table 2

Table 3

-------

front door

back door

Garage door

window

motion detector

window

smoke detector

window

-------

window

-------

motion detector

-------

smoke detector

loop 3 arm away

loop 2 disarm

loop 4 arm stay

loop 4 close device

loop 1 restore device 1

loop 3 arm away

loop 2 disarm

loop 4 arm stay

loop 4 close device

loop 1 restore device 1

duress

silent alarm

1-2-3-4

4-1-1-2

Used to Program

Zone characteristics, report codes, and serial numbers

5800 Series transmitter serial numbers

Voice descriptors for each zone

/<1;5

Table 4

-------

front door

back door

window

motion detector

smoke detector

loop 3 arm away

loop 2 disarm

loop 4 close device

loop 1 restore device 1

loop 3 arm away

loop 2 disarm

loop 4 close device

loop 1 restore device 1

duress

silent alarm

1-2-3-4

4-1-1-2

N8889QSV2 6/99

/<1;

duress

1-2-3-4

4-1-1-2