GREAT PLANES PBY Catalina Gebruiksaanwijzing - Pagina 10

Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} GREAT PLANES PBY Catalina. GREAT PLANES PBY Catalina 20 pagina's. Arf

❏

5. Place the stab into position on the back of the fuselage.

Trace the shape of the fuselage to the top of the stab with

a ﬁ ne felt-tip pen. Cut the covering between the lines you

have drawn. Be careful not to cut through the covering.

Cutting the wood will weaken the structure!

❏

6. Turn the fuselage upside-down. Test ﬁ t the stab to the

fuselage. Be sure the stab is aligned with the wing. When

you are satisﬁ ed with the ﬁ t, glue the stab to the fuselage.

❏

7. Install a single hinge into the slot in the leading edge of

the rudder. Then slide the rudder in place onto the fuselage.

❏

8. Locate the water rudder and notice the ﬂ at spot on the

side of the wire. The rudder wire will serve as the hinge for the

lower half of the rudder. Slide the water rudder into the hole

in the bottom of the fuselage and into the hole in the bottom

of the rudder. Using the included allen wrench, tighten the

set screw located on the lower left side of the rudder. Apply

thread locker and be sure the set screw is tightened against

the ﬂ at spot of the rudder. Move the rudder, making sure

it moves freely. Then apply a couple of drops of thin CA to

both sides of the rudder hinge you previously installed. Set it

aside until the glue hardens.

After the glue has hardened,

remove the wing from the fuselage.