ADEMCO TeleCommand Gebruikershandleiding - Pagina 5

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} ADEMCO TeleCommand. ADEMCO TeleCommand 20 pagina's. Telephone module

Step-by-Step Procedure

1. Activate the telephone and listen for dial tone.

2. Press the [#] key within 5-seconds.

Pressing the # key activates TeleCommand and prompts you to

enter your 4-digit TeleCommand code.

3. Enter your 4-digit TeleCommand code to access TeleCommand

and hear system status.

There is a 20-second time limit in which to enter TeleCommand

User Code. After this time expires, TeleCommand disconnects.

4. Listen to the Status Report.

5. To perform a Security System Command, enter your security

system 4-digit user code and then make the same key entries

normally performed at a local security system keypad.

6. Hang up the telephone when finished or press [#] + [*] + [*] to

disconnect from TeleCommand.

If Your Home Telephone System Does Not Subscribe To Multi-Frequency

Service: Access to TeleCommand and your security system can only be

provided if the telephone is multi-frequency capable (i.e. the telephone is

equipped with TONE/PULSE switch).

TONE/PULSE switch on your telephone to TONE and then return it to PULSE

when the TeleCommand session is completed.

Accessing the Security System

Using an On-Premises Telephone

To use TeleCommand, set the