Autonics CN-640 Series Producthandleiding - Pagina 4

Blader online of download pdf Producthandleiding voor {categorie_naam} Autonics CN-640 Series. Autonics CN-640 Series 6 pagina's. Isolated converters

Pagina afdrukken
Autonics CN-640 Series Producthandleiding
Parameter
Display Defaults Setting range
Input special
P1-29
function
InSF
LIN
Atmospheric
P1-30
0*00 Low-limit to high-limit input value
pressure
)PSI
Span
P1-31
!000 0.900 to 1.100
correction
SPAN
Normal
P1-32
average
digital filter
AvF
Moving
P1-33
average
MAvF
digital filter
Digital input
P1-34
key
DI-K
HOLD
Display part
P1-35
color
03)
COLR
GRN
Sensor
P1-36
disconnection
alarm output
BURN
P1-37 User level
STND STND, HIGH
USER
P1-38 Lock
LOCK
OFF
01)  Pressure of pressure sensor ＜ atmospheric pressure: display of vacuum degree in mmHg unit
Pressure of pressure sensor ＞ atmospheric pressure: display of positive pressure in kg/cm
02)  In the alarm output model, AL.RE displayed when the setting value of P1-21, 23, 25, 27 Alarm1 ~ 4 options are
alarm latch or alarm latch and standby sequence.
03)  The color of the display part in monitoring mode and program mode is red.
LIN: output the input value,
ROOT: output the square root of the
input value,
SQAR: output the square of the input
value,
TUF: Two Unit Function
01)
01
01 (OFF) to 16
04
HOLD: hold display value,
ZERO: remote zero, AL.RE: alarm reset
• Press the [◀] + [▲] keys for 3 sec to
operates with the set function.
GRN: green / green,
YELO: yellow / yellow, RED: red / red,
R--G: red / green, G--R: green / red
• Display: normal / error occur
ON, OFF
• Refer to the error.
ON
OFF: program / monitoring mode -
enable to check and setting
LOC1
: program mode - enable to check,
monitoring mode - enable to check
and setting
LOC2
: program mode - disable to check and
setting,
monitoring mode - enable to check
2
Display
■ Pulse input
condition
Parameter
P1-1 Input
P2-1
Input type
type:
Analog
P2-2
Display unit
Low-limit
P2-3
input value
P1-1 Input
High-limit
type: Analog
P2-4
input value
&
Decimal
P1-29 Input
P2-5
point
special
position
function:
TUF
P2-6
Low-limit scale
P1-1 Input
P2-7
High-limit scale
type:
P2-8
Input correction
Analog
Low-limit
&
value of
P1-37
P2-9
transmission
User level:
output 1
HIGH
High-limit
value of
P2-10
P1-37
transmission
User level:
output 1
HIGH
Low-limit
value of
P2-11
transmission
output 2
02)
-
High-limit
value of
P2-12
transmission
output 2
-
Bar display
P2-13
CH
Low-limit
P1-1 Input
scale value of
type: Temp.
P2-14
transmission
sensor
output 1
-
High-limit
scale value of
P2-15
transmission
output 1
Low-limit
scale value of
-
P2-16
transmission
output 2
High-limit
scale value of
P2-17
transmission
output 2
Input and
transmission
P2-18
output
extension
Alarm 1
P2-19
operation
P2-20 Alarm 1 option
Alarm 2
P2-21
operation
P2-22 Alarm 2 option
Alarm 3
P2-23
operation
P2-24 Alarm 3 option
Alarm 4
P2-25
operation
P2-26 Alarm 4 option
Alarm output
P2-27
hysteresis
Span
P2-28
correction
Moving
P2-29
average
digital filter
Digital input
P2-30
key
Display part
P2-31
color
P2-32 User level
P2-33 Lock
01) It can be applied when the setting value of the alarm option is alarm latch or alarm latch and standby sequence.
Display Defaults Setting range
50KH • Refer to Input Type and Range
IN-P
KHZ kHz, Hz, %, OFF
dUNT
0)00 Within input type range
L-RG
• Low-limit input value + 20 % F.S. ＜
High-limit input value
H-RG
5)00
0.0, 0.00, 0.000, 0
• Set the decimal point position of the
dP
)00
high / low-limit scale.
-1999 to 9999
L-SC
0)00
H-SC
5)00
000 -999 to 999
IN-B
[Transmission (DC 0 - 20 mA) output model]
DC 0 - 20 mA
0$00
[Transmission (0 - 10 VDCᜡ) output model]
lOR1
0 - 10 VDCᜡ
0)00
[Transmission (DC 0 - 20 mA) output model]
DC 0 - 20 mA
2)00
[Transmission (0 - 10 VDCᜡ) output model]
hOR1
0 - 10 VDCᜡ
1)00
[Transmission (DC 0 - 20 mA) output model]
DC 0 - 20 mA
0$00
[Transmission (0 - 10 VDCᜡ) output model]
lOR2
0 - 10 VDCᜡ
0)00
[Transmission (DC 0 - 20 mA) output model]
DC 0 - 20 mA
2)00
[Transmission (0 - 10 VDCᜡ) output model]
hOR2
0 - 10 VDCᜡ
1)00
[Transmission output model]
OUT1, OUT2
BAR
OUT1
lOU1
0)00
hOU1
5)00
[Transmission output model]
Low-limit to high-limit scale
lOU2
0)00
hOU2
5)00
[Transmission output model]
5P: output DC 3.2 - 20.8 mA, 0 - 10.5 VDCᜡ
out of 5 % of analog input range
10P: output DC 2.4 - 21.6 mA, 0 - 11 VDCᜡ
ExIO
5P
out of 10 % of analog input range
0P: output DC 4 - 20 mA, 0 - 10 VDCᜡ in
the analog input range
[Alarm output model] □□□
AT1: high-limit alarm, AT2: low-limit
alarm, SBA: sensor break alarm, AT0:
no alarm output
[Alarm output model] ■
A: standard alarm, B: alarm latch,
□□□.■
AT!A
AL-1
C: standby sequence,
D: alarm latch and standby sequence
• Enter alarm option setting mode
: Operate in 'Alarm 1 operation' mode
select AT1 or AT2 and input [◀] key
□□□.■
AT@A
AL-2
[Alarm output model]
Same as 'P2-19 / 20 Alarm 1 operation
/ option'
AT!A
□□□.■
• Depending on the number of alarm
AL-3
outputs, whether to display alarm 3 /
4 is different.
AT@A
□□□.■
AL-4
[Alarm output model]
001 to 999
A-HY
001
!000 0.900 to 1.100
SPAN
04 01 (OFF) to 16
MAvF
HOLD: hold display value,
ZERO: remote zero, AL.RE: alarm reset
• Press the [◀] + [▲] keys for 3 sec to
DI-K
HOLD
operates with the set function.
GRN: green / green,
YELO: yellow / yellow, RED: red / red,
R--G: red / green, G--R: green / red
COLR
GRN
• Display: normal / error occur
STND STND, HIGH
USER
OFF: program / monitoring mode -
enable to check and setting
LOC1
: program mode - enable to check,
monitoring mode - enable to check
LOCK
OFF
LOC2
: program mode - disable to check and
setting,
monitoring mode - enable to check
Display
condition
-
-
-
-
-
-
-
-
-
-
P2-32 User
level: HIGH
-
P2-32 User
level: HIGH
-
-
-
P2-19 to 26
Alarm
operation
/ option:
AT1.A,
AT2.A
P2-32 User
level: HIGH
01)
-
-
-
-
and setting