activTek INDUCT 10000 Handmatig - Pagina 9

Blader online of download pdf Handmatig voor {categorie_naam} activTek INDUCT 10000. activTek INDUCT 10000 16 pagina's. Electronic air purification system
Ook voor activTek INDUCT 10000: Handmatig (16 pagina's)

Pagina afdrukken
INSTALLING THE UNIT
1.
Find the optimal position downstream from the air handler. Ensure location in duct has enough
room for the mounting plate. It is recommended for maximum effectiveness that the unit be
placed as close to the air handler as possible.
NOTE:
The illustrations are shown installing an activTek INDUCT 10000. The procedures shown
in this manual apply to both units, unless otherwise indicated.
2.
Using the appropriate template
included, mark location for
installation.
3.
Using a 4" (4 inch) hole saw, cut
opening(s) into duct work.
4.
Place the mounting plate squarely into
place and fasten to duct work with sheet
metal screws.
5.
Move ballast assembly to
location and secure to
duct work with the four (4)
thumb screws provided.
6.
Unit may be taped with
aluminum HVAC tape to provide
complete seal.
Cut the second hole for
activTek INDUCT 10000 only.
9