High End Systems Power Cue Store Gebruikershandleiding - Pagina 10
Blader online of download pdf Gebruikershandleiding voor {categorie_naam} High End Systems Power Cue Store. High End Systems Power Cue Store 19 pagina's.
Pagina afdrukkenScene selection functions as follows:
o
o
o
Scene Types
When you set up a scene (see the section "Loading Scenes Into the Power Cue
Store"), it is given default Fade and Hold times according to the selection made
during configuration.
While in pass-through mode, use the SCENE TYPE button to:
o
o
o
o
o
Each press of the button will step you through these functions. You can abort any
option by waiting for a timeout after five seconds, or by pressing ESC.
Changing the Fade Time
To change the Fade time:
1.
2.
3.
4.
Changing the Hold Time
To change the Hold time:
1.
2.
3.
4.
Page 8
If you are in pass-through mode, the chosen scene will be output when you
go to manual mode.
If you are in manual mode, the chosen scene will be the next scene to be
output after pressing the AUTO button or using the slider.
In external control mode, the chosen scene will be output after you flash
STEP, as discussed in "External Control".
Change or edit fade and hold times.
Reset the scene back to default values.
Delete the scene.
Flag the scene as the first scene in a sequence.
Flag the scene as the last scene in a sequence.
Press SCENE TYPE until FAd appears in the display.
Press STORE.
The current Fade value appears in the display.
Adjust the value with the slider. Fade values are adjustable between 0-0.9
seconds, and 1-99 seconds.
Press STORE until the display shows YES.
Press SCENE TYPE until Hld appears in the display.
Press STORE.
The current Hold value appears in the display.
Adjust the value with the slider.
Hold is adjustable between 0-0.9 seconds, 1-59 seconds and 1-30 minutes.
Press STORE until the display shows YES.
Power Cue Store
TM
User Manual