iHealth Lite Gebruikershandleiding - Pagina 14

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} iHealth Lite. iHealth Lite 17 pagina's.

Sauna continually beeps when turned on Ensure the temp sensor cable is plugged into the correct input in

TO REGISTER YOUR iHEALTH SAUNAS TO RECEIVE THE FULL

WARRANTY, PLEASE ENTER THE FOLLOWING INFORMATION AND

POST TO iHEALTH SAUNAS, 29/137-145 ROOKS ROAD, VERMONT VIC 3133

WITHIN 14 DAYS FROM THE DATE OF INSTALLATION.

Serial Number:

First Name:

Address:

Suburb:

Phone No:

Email:

Problems Please Ensure

Sauna not turning on Power point sauna is connected to is operational

White (lume) wire from control panel is connected into the correct

outlet on control box. See page 30

Temperature Check the temperature sett ing on the control panel and reset if

required. Refer to page 32 for instructions.

Check the temperature sensor cable is connected to the control box

in the roof and the head is visible inside the sauna. Unscrew plate in

roof and pull sensor head down slightly. Reatt ach plate.

Lights not turning on Light 1 and Light 2 butt ons are pressed aft er power butt on on sauna

is pressed. See Page 32

Light connectors are plugged in correct outlet on control box. See

page 30

Sauna not heating Sauna on/oﬀ butt on pressed for a second time aft er sauna is turned

on initially

There is 'time' in the time display on the control panel. See page 32

All 4 heater cables are connected correctly into control box. See

page 30

The Auto function (middle light) is turned oﬀ

control box. See page 30

Troubleshooting

Purchase Date:

Last Name:

State, Postcode:

Mobile: