Autool BT160 Gebruikershandleiding - Pagina 5

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Autool BT160. Autool BT160 10 pagina's. Automotive electric system tester

★ Contact the probe tip to a positive (+), the LED should

light RED.

★ Contact the probe tip to a negative (-), the LED should

light GREEN.

NOTE: DO NOT operate it in area with combustible gas,

dust and explosive conditions. NOT allowed to use it with AC

and over 24V DC circuit.

3.Continuity Testing

★ Unroll the leads.

★ Connect red clip to positive terminal of vehicle's battery.

★ Connect black clip to negative terminal of vehicle's

battery.

★ Connect auxiliary ground lead to one side of tested wire

along with probe tip connecting to the other side. When

continuity is present, the LED will light GREEN. If LED does

NOT light up, NO continuity present.

+ -