Autopilot APCETHD Handmatig - Pagina 7

Blader online of download pdf Handmatig voor {categorie_naam} Autopilot APCETHD. Autopilot APCETHD 18 pagina's.

Page 6

Factory Settings

The APCETHD comes pre-programmed with factory settings.

These settings may be adjusted by the user. For best results,

verify changes after adjusting any settings. The controller can be

easily reset to factory settings. (see below)

Temp day settings

Temp night setting

Temp dead-band

Humid settings

Humid mode

Humid dead-band

CO2 Mode

CO2 ON timer

CO2 OFF timer

Temp & humid lock

Reset Factory Settings - Press and hold the Enter / Reset and

down buttons for 3 seconds. The display will read f.Set. Press the

Enter/reset button again to restore the factory default settings.

When the factory reset is complete the unit will say

Note: To change the temperature reading from F to C,

press and hold the UP and DOWN buttons for 2-3

seconds.

80°F

70°F

3°F

50 % rH

Rh decr

5 % rH

DayFree

1 minute

30 minutes

Split

APCETHD

doNE.