AGS Mini Merlin Installatie- en bedieningshandleiding - Pagina 13
Blader online of download pdf Installatie- en bedieningshandleiding voor {categorie_naam} AGS Mini Merlin. AGS Mini Merlin 16 pagina's. Ch4 co: dual gas detector methane & carbon monoxide
Ook voor AGS Mini Merlin: Gebruikershandleiding (16 pagina's), Installatie, bediening en onderhoud (20 pagina's)
Pagina afdrukken
Installation & Operation Manual
Remote Shut Off Screen
This message will display if the device is integrated with remote shut off devices
such as smoke/ fire alarms.
When activated, the device will isolate the gas supply if installed and configured to do so.
End of Life Screen
This message indicates that the devices gas sensing elements have reached their
expected operational lifecycle.
No gas levels will be displayed.
Contact your supplier and replace the unit immediately.
The expected lifecycle may vary depending on environmental conditions!
General Maintenance
Keep your device in good working order follow these basic principles;
DO carefully remove any accumulated dust from the outer enclosure once a month by
using a slightly damp cloth.
NEVER use detergents or solvents to clean your device – this may permenantly or
temporarily damage the gas sensing elements.
NEVER spray air fresheners, hair spray, paint or other aerosols near the device.
NEVER paint the device. Paint will seal vents and interfere with the device.
High concentrations of alcohol found in many products may damage, deteriorate or affect
the gas sensing elements – such as; wine; deodorants; stain removers; thinners etc.
Other gases and substances to avoid; Corrosives (i.e. chlorine & hydrogen chloride); Alkali
metals; Basic or acidic compounds; Silicones; Tetraethyl lead; Halogens and halogenated
compounds.
Rev: 11 08-20
Mini Merlin
13