AGS Mini Merlin CH4CO Gebruikershandleiding - Pagina 8
Blader online of download pdf Gebruikershandleiding voor {categorie_naam} AGS Mini Merlin CH4CO. AGS Mini Merlin CH4CO 16 pagina's. Dual gas detector, methane & carbon monoxide gas
Ook voor AGS Mini Merlin CH4CO: Installatie- en bedieningshandleiding (16 pagina's)
Pagina afdrukkenMINI MERLIN CH4CO
6.
Installation & Location
This device is designed for surface mounting using 2 mounting screws (not supplied) and MUST
be installed by a licensed insured contractor. Mark the location of the two holes needed on
the wall using the back plate as a template. Placing at eye level allows for optimum monitoring
of the digital display screen, or as guide, 5 feet (1.5 meters) from ground level.
Back Plate
Removing the back plate gives access to the circuit board.
There are also two 'knock outs' for electrical wiring access & a divider to separate low and
high voltage connections.
Recommended Installation Locations
The device should be mounted near the
boiler or gas fired appliance/s such as
domestic and commercial boiler rooms and basements.
When choosing your location, make sure you are able to hear the alarm from all areas.
DO place the device at eye level to optimise monitoring of the digital display.
DO place out of reach of children.
AVOID installation within 6 feet (2 metres) of heating or cooking appliances.
AVOID Installation near any ventilation openings, i.e. vents, chimneys, windows etc.
AVOID installation near ceiling fans, windows or areas exposed to direct weather.
Rev: 08 05-19
Do not remove the Circuit Board!
This will void any warranty.
USER GUIDE
8