Gama Sonic 149033 Gebruiksaanwijzing - Pagina 3
Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} Gama Sonic 149033. Gama Sonic 149033 4 pagina's. Solar lamp with gs solar led light bulb
Pagina afdrukkenAssembly Instructions
NOTE:
The following steps are for reference only. Consult
your local hardware store for the best installation method
for your surface.
1. Install the GS Solar LED Bulb into the top (A) by
twisting it clockwise. Be sure to hold the bulb by its
base.
2. Turn the lamp on using the operation switch located
on the underside of the top (A)
3. Attach the top (A) to the fixture (B) and secure with
the two screws.
a. 3" Fitter Mount
Note: If you are replacing an existing gas/electric post light,
you must consult a certified technician to disconnect them
before installation.
> Begin by attaching the Fitter (C) to the fixture (B).
Secure the fitter (C) using the included lock washer
and nut.
> Place part (C) on your existing 3" pole and secure
with the provided set screws.
> Be sure to not overtighten the screws.
b. Pier (Flat) Mount
> Using the pier mount (D) as a template, drill two
holes in the desired mounting location.
> Place the anchors in the holes and secure the mount
(D) to the surface using the provided screws.
> Attach the fixture (B) to the mount (D) by twisting
the fixture clockwise.
c. Wall Mount
Note: Installing the light on a wall may limit the solar panel
for sun exposure. Make sure the lamp is mounted so direct
sun exposure is available.
> Using the wall mount (E) as a template, drill two
holes in the desired mounting location.
> Place the anchors in the holes and secure the mount
(E) to the wall using the provided screws.
> Attach the fixture (B) to the mount (E) by twisting the
fixture clockwise.
page 3
Operation Instructions
1. Install the GS Solar LED Bulb in the top (A).
2. Locate the operation switch on the underside of the
top (A).
3. Turn the operation switch to the Low or High position
according to your preferences:
Low = Softer light and longer duration
High = Brighter light output
4. The solar lamp will automatically operate at dusk.
Operation Switch
Replacement Parts
Replacement Batteries and Bulbs are available at
www.gamasonic.com or via
our Toll Free number: +1-800-835-4113
Your Lamp can use the following bulbs:
C37WW10W – included bulb with Warm White LEDs (2700K)
C37BW10W – bulb with Bright White LEDs (6000K)
F30WW05W – Flame bulb with simulated flame LEDs
Your lamp uses the following battery:
GS32V15 – Li-Ion 3.2V/1500mAh