Airelectronics U-Ground Gebruikershandleiding - Pagina 11
Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Airelectronics U-Ground. Airelectronics U-Ground 13 pagina's. Uav autopilots
U-Ground OneBoard User Manual - Joystick
Figure 5: Military connector in
Airelectronic's modified Futaba
5.2
5.2
Configuration for Futaba Joystick
Configuration for Futaba Joystick
Airelectronics will supply you a Futaba configured for U-Ground OneBoard, modified with a
military connector. Configuration should be not altered for the proper operation of the system.
For reference, we include hereby the proper configuration for a Futaba:
Modulation
Channel 5 switch
Channel 7 switch
Sub-Trim
Dual Rates
Exponential
End points
Reverse
Throttle-cut
Failsafe
Modulation must be set to PCM in Futaba T7CP variant to work with U-Ground OneBoard . In
case you need to adjust modulation, follow the following instructions
Using the supplied aerial military connector the
connections between U-Ground OneBoard
Futaba military connector (as detailed in Figure 5)
should be established as shown in following table
(Table 3)
Pin in Futaba
Connector
1
2
3
Feature
PCM/PPM
model)
Switch D
Switch B
All set to 0
100%
0%
100%
Normal for all channels
Inhibited
Normal in all channels
Function
Connect to
Pin 4
GND
(White-Black-Brown; A 'Y'
may be required)
Signal
(White-Brown)
Connect to power supply
Vin
for joystick (6,5V-36V)
Table 3: Futaba connections
Proper Setting
(depends
on
and
Pin 27
11