AFL Hyperscale 2RU Installatiehandleiding - Pagina 12
Blader online of download pdf Installatiehandleiding voor {categorie_naam} AFL Hyperscale 2RU. AFL Hyperscale 2RU 16 pagina's. Front-access v-panel (fvp)
Ook voor AFL Hyperscale 2RU: Installatiehandleiding (17 pagina's), Installatiehandleiding (20 pagina's)
Pagina afdrukken
Cable Installation
Cable Fiber
Slack Loop
Cable Braid
Cable
Tie-Off Point
Cassette
Identification
Labels
Splice Tray 1 (BOTTOM): Tie off cable braid to splice tray. Starting with internal pigtail #1
24
fiber (GREEN), place splice protector into
Cable Fiber
Slack Loop
Cable Braid
Cable
Tie-Off Point
Splice Tray 2 (TOP): Tie off cable braid to splice tray. Starting with internal pigtail #7
25
fiber (GREEN), place splice protector into
12
© AFL Hyperscale. All rights reserved
Splice Tray 1
(Bottom Tray)
YELLOW
YELLOW
holder. Coil fiber in suggested route shown.
Splice Tray 2
(Top Tray)
holder. Coil fiber in suggested route shown.
Internal SWR
®
Pigtail
Fiber Slack Loop
(Pre-Installed)
Tail
Identification
Labels
(RED),
splice to cable
Internal SWR
Pigtail
®
Fiber Slack Loop
(Pre-Installed)
Tail
Identification
Labels
Cassette
Identification
Labels
(RED),
splice to cable
Series