AFL Hyperscale U Series Installatiehandleiding - Pagina 12

Blader online of download pdf Installatiehandleiding voor {categorie_naam} AFL Hyperscale U Series. AFL Hyperscale U Series 16 pagina's. Front-access v-panel
Ook voor AFL Hyperscale U Series: Installatiehandleiding (8 pagina's), Installatiehandleiding (16 pagina's), Installatiehandleiding (8 pagina's), Installatiehandleiding (8 pagina's), Installatiehandleiding (12 pagina's), Installatiehandleiding (8 pagina's), Installatiehandleiding (8 pagina's), Installatiehandleiding (20 pagina's), Installatiehandleiding (17 pagina's), Installatiehandleiding (20 pagina's)

Pagina afdrukken
AFL Hyperscale U Series Installatiehandleiding
Cable Installation
Cable Fiber
Slack Loop
Cable Braid
Cable
Tie-Off Point
Cassette
Identi cation
Labels
25.
Splice Tray 1 (BOTTOM): Tie off cable braid to splice tray. Starting with internal pigtail #1
ber (GREEN), place splice protector into
Cable Fiber
Slack Loop
Cable Braid
Cable
Tie-Off Point
Splice Tray 2 (TOP): Tie off cable braid to splice tray. Starting with internal pigtail #7
26.
ber (GREEN), place splice protector into
12
© AFL Hyperscale. All rights reserved
Splice Tray 1
(Bottom Tray)
YELLOW
YELLOW
holder. Coil ber in suggested route shown.
Splice Tray 2
(Top Tray)
holder. Coil ber in suggested route shown.
Internal SWR
®
Pigtail
Fiber Slack Loop
(Pre-Installed)
Tail
Identi cation
Labels
(RED),
splice to cable
Internal SWR Pigtail
Fiber Slack Loop
(Pre-Installed)
Tail
Identi cation
Labels
Cassette
Identi cation
Labels
(RED),
splice to cable
Series