aireRyder FN73335 Handleiding voor installatie en gebruik - Pagina 4

Blader online of download pdf Handleiding voor installatie en gebruik voor {categorie_naam} aireRyder FN73335. aireRyder FN73335 19 pagina's.

7. Remove the light kit housing

by loosening 3 screws on the

side.

Attach light kit assembly onto fan light housing with 3 original screws.

11. Remove the decorative cap

from the threaded pipe.

8. Insert blades into fan blade

holes.

10. Fan light housing installation

Loosen screws on terminal block first, for accepting new wires from

ceiling fan.

10-1. Insert blue wire from ceiling fan into terminal block extending from

blue wire from light kit and tighten by screw on terminal block.

10-2. Insert orange wire from ceiling fan into terminal block extending from

orange wire from light kit and tighten by screw on terminal block.

10-3. Insert green /yellow wire from ceiling fan into terminal block extending

from green/yellow wire from light kit and tighten by screw on terminal block.

12. Install two proper lamps to the

sockets (E14, max. 60W,

not included).

9. Fasten blade onto motor

assembly through rectangular

hole using the washer & motor

screws provided from hardware

bag.

13. Attach the glass shade up to

the light kit and secure it with

decorative cap.