Game Winner 07-4101-GW Gebruiksaanwijzing - Pagina 5
Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} Game Winner 07-4101-GW. Game Winner 07-4101-GW 6 pagina's. Manual meat cuber/tenderizer
Pagina afdrukkenfor a picnic, make sure the foods are already chilled when they go into the insulated
hamper. The hamper won't chill food - it just keeps food cold when properly packed
with ice. Hot cooked foods should be placed in shallow containers and immediately
refrigerated so they cool rapidly. Make sure to cover foods after they are cool.
NOTE: Special considerations must be made when using venison or other wild
game, since it can become heavily contaminated during field dressing. Venison is
often held at temperatures that could potentially allow bacteria to grow, such as when
it is being transported. Refer to the USDA Meat and Poultry Department for further
questions or information on meat and food safety.
-8-
ASSEMBLY INSTRUCTIONS
1. Remove
the
Housing
Thumbscrews securing the Top
Housing to the Bottom Housing
(Figure 1).
2. Remove the Top Housing and
Blade Assembly from the Bottom
Housing.
CAUTION! Blades are very sharp!
3. Using the Large Allen Wrench
and Support Leg Screws, attach the
Support Leg to the Lower Housing.
4. Install the Chute to the Top
Housing using an Small Allen
Wrench and Chute Screws.
5. Attach the Countertop Protector
Pad to the Support Leg.
6. Mount the Cuber/Tenderizer to
a table, workbench or other stable,
sturdy structure with the C-Clamp.
7. Insert the Blade Assembly into
the Lower Housing, guiding the Drive
Shaft into the bearing journals. Make
sure the teeth of the Blade Assembly
are properly meshed together.
8. Position the Top Housing onto the
Lower Housing and line up the screw
holes.
9. Secure the Top Housing to
the
Lower
Housing
using
Housing Thumbscrews. DO NOT
OVERTIGHTEN!
10. Insert the Left and Right Combs
into the Top Housing (Figure 2).
NOTE:
The
Combs
and
Top
Housing are marked "L - Left" and "R
- Right" to aid Comb installation.
11. Install Handle onto the Blade
Assembly Shaft.
12. Secure the Handle to Blade Rack
Shaft with the Handle Thumbscrew .
Chute
Combs
Chute
Screws
Blade
Assembly
Bottom
Housing
Bearing
Journals
Support
Leg
Countertop
Protector
Pad
the
Figure 2
WARNING!
Protective/cut-resistant
Kevlar Gloves are
recommended whenever
handling the
Blade assembly!
-5-
Figure 1
Housing
Thumbscrews
Top Housing
Blade
Bearings
Blade
Drive Shaft
Handle
Thumbscrew
Support
Leg
Screws
Handle
C-Clamp