Game Winner 159020 Gebruiksaanwijzing - Pagina 11

Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} Game Winner 159020. Game Winner 159020 20 pagina's. 15’ ladder stand

ASSEMBLY INSTRUCTIONS

Do not tighten any nut and bolt combinations completely

until all parts are assembled together! Finger tighten plus

one turn of a wrench only! This will temporarily hold the

locknut on the bolt while helping alignment of all parts!

After all parts are assembled together, all nut and bolt

combinations must be completely tightened.

STEP 1

NOTE: When selecting a tree to install the

treestand in, never use a treestand on a dead,

leaning, diseased or loose barked tree, or a utility

pole. Always avoid electrical power lines.

Take two side rails (10) and assemble them to the

outer edge of the tree blade (11) using four 1/4 X

2-1/2 IN bolts (23), and four 1/4-20 nuts (24).

SEE FIGURE 1.

STEP 2

Begin the assembly of the seat by sliding one seat

rail (6) through each pocket on the sides of the

sewn seat (13). SEE FIGURE 2A.

Slide the loop ends of the seat strap onto each seat

side rail (10). SEE FIGURE 2B.

FIGURE 1

FIGURE

Instruction Manual : 15' LADDER STAND