Majella MCVC Diy handleiding - Pagina 2

Blader online of download pdf Diy handleiding voor {categorie_naam} Majella MCVC. Majella MCVC 15 pagina's. Midi to cv converter
Ook voor Majella MCVC: Gebruikershandleiding (6 pagina's)

INTRODUCTION
THE MCVC (MIDI to CV Converter)
The MCVC is a four-channel MIDI (Musical
Instrument Digital Interface) to Control
Voltage (CV) converter. The MCVC is a
straightforward
interface
Eurorack synthesizer system and devices
that
communicate
protocol. The MIDI CV Converter bridges the
gap between MIDI and Eurorack systems,
by converting MIDI messages to control
voltages, corresponding to eurorack signal
standards.
CONTENTS
The MCVC comes in a box and is fully
assembled and tested. Included are a 16-
pin IDC power cable and M3 mounting
screws + rack crash protection washers.
SUPPORT
If you have any further questions or queries
please contact:
between
the
using
the
MIDI
©2019 Majella Audio

SPECIFICATIONS

Below are the specifications of the MCVC.
!! Dimensions 128,5 x 70,8 (14 HP) x
15mm
!! Doepfer A-100 compatible
!! 16pin Power
!! Current
-
.25mA, 5V 30mA.
POWER CONNECTION
This Module is designed to be connected to
a Eurorack system power supply using a 16
pin ribbon cable. The -12V (red lead) should
be directed as shown in the picture below.
WARNING!
The MCVC is designed for Eurorack systems.
The supply should be +-12V and connected
signals should not be outside of the +-12V
range!
Do
connecting the power, this will damage
your module permanently!
Please treat your Majella Audio products
with care. Majella Audio does not offer
warranty for any damages to the MCVC due
to
accidental
scratches, wrong input/output connections
etc.)
2
DIY Manual
( Using 5V rail!
)
usage:
+12V
39mA,
not
reverse
polarity
damages
(fluid
MCVC
-12V
when
spills,