Adexa HRQ-711 Gebruiksaanwijzing - Pagina 9

Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} Adexa HRQ-711. Adexa HRQ-711 13 pagina's. Gas solid top with gas oven

Instruction Manual

In the process of work and before and after, due to the high temperature

relationship, do not directly contact the box with your hands, especially in the

high temperature area.

Do not use the power supply (gas) other than the product label power supply.

Do not use the power supply knife that does not meet the safety standards and

quickly cut off the gas source valve.

pay attention to!

When the minefield is close, the power switch should be disconnected as soon as

possible.

Can avoid the electrical damage caused by lightning strike.

It is forbidden to use hard and sharp objects to destroy the furnace body surface

and enamel surface.

After the work is finished, to close the power supply knife and quickly cut off

the gas source valve.

Circuit installation and maintenance must be carried out by qualified

professional engineering personnel.

If the power cord is damaged, it must be replaced by the manufacturer or its

maintenance department or similar professional personnel to avoid danger.

3.5 Maintenance

※Clean the burner and basin regularly (once daily day)

※If not used for a long time, use the cloth coated with gasoline, clean

the stainless steel surface, put in a well-ventilated place.

※Clean the stainless steel surface with warm soapy water every day and

rinse thoroughly (do not rinse the equipment directly with a water gun).

※When cleaning equipment, do not use cleaners, brushes or scraper tools

containing wear substances to clean the stainless steel surface, as

residual iron scraps can cause rust. And wipe according to the satin

direction, do not use products containing chlorine (bleach, hydrochloric

acid, etc.) to clean the steel surface, even if these products have been

diluted, do not use.

※This product cannot be washed directly out with water.