AHB BREWDEVIL B70 Gebruiksaanwijzing - Pagina 14
Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} AHB BREWDEVIL B70. AHB BREWDEVIL B70 17 pagina's. All-in-one automaticrobrewery
Pagina afdrukken13. Other Specification Settings
14. Brewing Process (example, process may vary for different beer recipes)
1. Preparation:
⚫ Ensure the machine is clean before and after each use.
⚫ Assemble the Bazooka filter to the tap and add the required quantity of water before switching on.
2. Mashing:
⚫ Heat the water to 66℃ - 68℃.
⚫ Gently add the grain into the grain basket and stir.
⚫ Start the circulation pump when the correct temperature is reached, adjusting the pump flow as needed.
⚫ First mashing session lasts 60 minutes (actual time may vary).
⚫ For the second mashing, set the temperature to 78-80℃ with a session time of 20 minutes (actual time
may vary).
⚫ After mashing, carefully lift the grain basket with the separate handle and secure the lugs onto the support
ring on the boiler rim.
3. Sparging:
⚫ Use sparging water to extract remaining sugars from the grain in the basket.
⚫ Allow the basket to drain into the boiler for approximately 10 minutes after sparging.
4. Boiling:
⚫ Heat the water to boiling temperature (can be done while the basket is draining).
⚫ Boiling session lasts 90 minutes (actual time may vary).
⚫ Add hops and other ingredients at the correct timings according to your recipe.
⚫ Immerse your wort chiller approximately 15 minutes before the boil finishes to sterilize the equipment.
5. Cooling and Transfer:
⚫ After boiling, cool the wort to 20℃.
⚫ Transfer the cooled wort to your fermenting vessel via the drain tap/Bazooka filter on the boiler front.
These steps will guide you through a successful brewing process, but feel free to adjust timings and temperatures
based on your specific recipe and preferences. Happy brewing!
1. Press Spec Tab in App to access Specifications settings screen.
2. Temperature Calibrate allows the machine temperature reading to be
adjusted from -10 to +10 degrees C
3. Boiling Point Compensation allows boiling point definition to be
adjusted down by 0 to 10 degrees C
4. Power Model It is not necessary to change this setting. Do not adjust
14