decorflame M100-25FAO Gebruiksaanwijzing - Pagina 9

Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} decorflame M100-25FAO. decorflame M100-25FAO 12 pagina's. Electric fireplace heater

Pagina afdrukken

Note: When the O/I switch is turned off, the

heater functions will stop even though the

switches may be in the ON position.

MAINTENANCE WARNING:

Disconnect power and unplug the power

cord before attempting any maintenance or

cleaning to reduce the risk of fire, electric

shock or damage to persons. The bulbs in

your unit can become extremely hot. Allow

at least 10 minutes between turning off the

unit and removing the light bulbs to avoid

the accidental burning of the skin.

RISK OF FIRE: Do not exceed the

recommended bulb wattage.

REPLACING THE FLAME

EFFECT LIGHT AND

LOG-SET LIGHT BULBS

Step 1: Remove 12 screws on the back of

fireplace and open the rear cover.

There are 2 larger screws and 10

smaller screws.

Step 2: You will find 1 X 40W Type B-10

bulb under log-set bed.

Step 3:

Loosen and remove the burnt out

bulb and replace with new bulb.

Step 4: Close the rear cover. Secure the

2 larger screws into the top left

corner hole and bottom right

corner holes as shown in the

diagram. Secure the 12 smaller

screws into the remaining holes.

MAINTENANCE / REPA IRS

Make sure the screws are in the

correct holes and have been

tightened.

Step 5: Plug in the unit

REPAIR SET

TOUCH-UP REPAIR PAINT

Paint directly on the mantel unit if neces-

sary. Fig. A.