ADF Web HD67506M Gebruikershandleiding - Pagina 11

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} ADF Web HD67506M. ADF Web HD67506M 18 pagina's.

Industrial Electronic Devices

Note:

When you install a new version of the software, if it is the first time it is better you do the update of the Firmware in the HD67506 or

HD67506M device.

Note:

When you receive the device, for the first time, you also have to update the Firmware in the HD67506 or HD67506M device.

Warning:

If Fig. 6 appears when you try to do the Update try these points before seeking assistance:

Check if the serial COM port selected is the correct one;

Check if the serial cable is connected between the PC and the device;

If you are using a USB

converter

Try to repeat the operations for the updating;

Try with another PC;

Try to restart the PC.

CHARACTERISTICS OF THE CABLES:

THERNET

Linking of Ethernet connector to a HUB must be carried out by a Category 5E cable. The cable has to conform to the T568 norms relative to

connections in cat.5 up to 100 Mbps. The length cannot go beyond 100 meters.

232:

The connection from RS232 socket to a serial port (example one from a personal computer) must be made with a Null

Modem cable (a serial cable where the pins 2 and 3 are crossed).

It is recommended that the RS232 cable not exceed 15 meters.

The device is provided with a D-sub connector type DE-9 Male (also called DB-9). The cable must use a DE-9 Female

connector.

ADFweb.com S.r.l.

RS232 converter try with a native COM port or change the

User Manual Modbus Master / Ethernet

Document code: MN67506_ENG

Revision 1.012

Figure 6: "Protection" window

Page 11 of 18