Align-Pilates M2-Pro Reformer Montagehandleiding - Pagina 5
Blader online of download pdf Montagehandleiding voor {categorie_naam} Align-Pilates M2-Pro Reformer. Align-Pilates M2-Pro Reformer 12 pagina's. Reformer
e. Attach the maple rope risers using 8 of the M8 x 65mm bolts located in the bolt pack (from the main box). The
bolts are inserted from the outside of the frame with the larger washer on the outside and small washer on the
inside. Use the supplied socket spanner to hold the bolt as you tighten with the allen key. Do all the bolts up to
hand tight, then go round and tighten them fully (Fig.16). Once tight, insert the black blocking plugs (Fig.17) and
repeat for the second riser.
f. You will now be able to attach the silent pulleys - there is a single washer which goes on the knob side of the
pulley. We suggest during set-up to install the silent pulleys in the highest position, (Fig.18).
Washer
g. Insert the shoulder rests and lock into place with the locking pin for additional security (Fig.19).
h. Now attach the handles to the rope by threading the loop through the rope eyelet and then threading the
handle through the loop, see images from Fig.20 - 22.
Fig.16
Washer
Fig.20
Black Blocker Plug
Fig.18
Locking
pin
Fig.19
Fig.21
Fig.17
Fig.22
5